Susmita

From (art)scienceblr
Revision as of 14:33, 13 October 2017 by Bsuvansh (Talk | contribs)

Jump to: navigation, search

The 3D printer which is available in Srishti Old Campus is a FabX The printer has two sources by which you can give it the command to print the object that are the

- USB 2.0 A/B and

- SD card

Make sure that there is no data on the SD card because you need to format the card in order to use it with the printer.

Once you are done designing the model in any of the 3D modelling softwares such as Sketchup, Blender, Maya, Catia, AutoCAD, Fusion 360 etc etc. Then you need to export the file as STL format. One pointer - sketchup can export the .skp file in .stl format using ht following PLUGIN For the above 3D printer you can use Cura version 15.04.6.


Settings for Cura version 15.04.6

In the basic

print speed (mm/s) = 50

Printing temperature (C) = 210

Filament diameter depends on the filament that you will be using

Nozzle size (mm) = 0.4


About the 3D printer

Print speed 20-40mm/s

Single extruder

Filament Diameter 1.75mm

Built platform 100mm * 100mm * 100mm

Nozzle Diameter 0.4mm

Nozzle temperature 210 degrees

bed temperature 70-50 degrees