Susmita

The 3D printer which is available in Srishti Old Campus is a FABX The printer has two sources by which you can give it the command to print the object that are the

- USB 2.0 A/B and

- SD card

Make sure that there is no data on the SD card because you need to format the card in order to use it with the printer.

Software

-Cura 2.7.0

-Cura 15.04.6

-SketchUp

-Repetier-Host Mac

-Slic3r

About the 3D printer

SOFTWARE SETTINGS FOR CURA

Print speed 20-40mm/s

Single extruder

Filament Diameter 1.75mm

Built platform 100mm * 100mm * 100mm

Nozzle Diameter 0.4mm

Nozzle temperature 210 degrees

bed temperature 70-50 degrees