Difference between revisions of "Susmita"
| Line 1: | Line 1: | ||
| − | The 3D printer which is available in Srishti Old Campus is a [ | + | The 3D printer which is available in Srishti Old Campus is a [https://www.3ding.in/ FABX] |
The printer has two sources by which you can give it the command to print the object that are the | The printer has two sources by which you can give it the command to print the object that are the | ||
| Line 6: | Line 6: | ||
- SD card | - SD card | ||
| − | Make sure that there is no data on the SD card because you need to format the card in order to use it with the printer. | + | Make sure that there is no data on the SD card because you need to format the card in order to use it with the printer. |
| + | |||
| + | Once you are done designing the model in any of the 3D modelling softwares such as Sketchup, Blender, Maya, Catia, AutoCAD, Fusion 360 etc etc. Then you need to export the file as STL format. | ||
| + | One pointer - sketchup can export the .skp file in .stl format using ht following plugin [https://extensions.sketchup.com/en/content/sketchup-stl plugin] | ||
Revision as of 14:17, 13 October 2017
The 3D printer which is available in Srishti Old Campus is a FABX The printer has two sources by which you can give it the command to print the object that are the
- USB 2.0 A/B and
- SD card
Make sure that there is no data on the SD card because you need to format the card in order to use it with the printer.
Once you are done designing the model in any of the 3D modelling softwares such as Sketchup, Blender, Maya, Catia, AutoCAD, Fusion 360 etc etc. Then you need to export the file as STL format. One pointer - sketchup can export the .skp file in .stl format using ht following plugin plugin
Software
-Cura 2.7.0
-Cura 15.04.6
-SketchUp
-Repetier-Host Mac
-Slic3r
About the 3D printer
SOFTWARE SETTINGS FOR CURA
Print speed 20-40mm/s
Single extruder
Filament Diameter 1.75mm
Built platform 100mm * 100mm * 100mm
Nozzle Diameter 0.4mm
Nozzle temperature 210 degrees
bed temperature 70-50 degrees
