Difference between revisions of "Susmita"
From (art)scienceblr
| Line 1: | Line 1: | ||
3D printer that we used was the FabX https://www.3ding.in/3dprinters/fabx | 3D printer that we used was the FabX https://www.3ding.in/3dprinters/fabx | ||
| + | |||
| + | [http://www.3dig.in FABX] | ||
| + | |||
Softwares used | Softwares used | ||
| + | |||
-Cura 2.7.0 | -Cura 2.7.0 | ||
| + | |||
-Cura 15.04.6 | -Cura 15.04.6 | ||
| + | |||
-SketchUp | -SketchUp | ||
| + | |||
-Repetier-Host Mac | -Repetier-Host Mac | ||
| + | |||
-Slic3r | -Slic3r | ||
About the 3D printer | About the 3D printer | ||
| − | SOFTWARE SETTINGS FOR CURA | + | |
| + | ''' | ||
| + | SOFTWARE SETTINGS FOR CURA''' | ||
| + | |||
| + | |||
| + | |||
| + | |||
Print speed 20-40mm/s | Print speed 20-40mm/s | ||
| + | |||
Single extruder | Single extruder | ||
| + | |||
Filament Diameter 1.75mm | Filament Diameter 1.75mm | ||
| + | |||
Built platform 100mm * 100mm * 100mm | Built platform 100mm * 100mm * 100mm | ||
| + | |||
Nozzle Diameter 0.4mm | Nozzle Diameter 0.4mm | ||
| + | |||
Nozzle temperature 210 degrees | Nozzle temperature 210 degrees | ||
| + | |||
bed temperature 70-50 degrees | bed temperature 70-50 degrees | ||
Revision as of 12:07, 13 October 2017
3D printer that we used was the FabX https://www.3ding.in/3dprinters/fabx
Softwares used
-Cura 2.7.0
-Cura 15.04.6
-SketchUp
-Repetier-Host Mac
-Slic3r
About the 3D printer
SOFTWARE SETTINGS FOR CURA
Print speed 20-40mm/s
Single extruder
Filament Diameter 1.75mm
Built platform 100mm * 100mm * 100mm
Nozzle Diameter 0.4mm
Nozzle temperature 210 degrees
bed temperature 70-50 degrees
