Difference between revisions of "User:Disha"
(Created page with "Disha, here and my area of interest is Electronics, design and technology. Here,at Cube lab i got exposed to Art-Science- BLR. I designed a microscope from junk materials. I a...") |
|||
| (6 intermediate revisions by one user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | I am working at HBCSE and my area of interest is Electronics, design and technology. Here,at Cube lab i got exposed to Art-Science- BLR. I designed a microscope from junk. I am interested in designing new useful stuff from junk and share ideas. | |
| + | |||
| + | Here, I am sharing making of a microscope which I learnt in a workshop conducted by ART SCIENCE BLR lab, Bangalore. | ||
| + | |||
| + | '''Making Process''' | ||
| + | |||
| + | |||
| + | '''Camera''' | ||
| + | |||
| + | • Dismantle a web cam, and try to explore how the camera works. | ||
| + | |||
| + | • Lens is the main part and later it was figured out that to make this microscope we had to invert the lens. | ||
| + | |||
| + | • Testing of these lenses and its magnifying power involves two steps. | ||
| + | |||
| + | 1. Invert the camera lens | ||
| + | 2. Bring lens close to computer screen till it shows RGB colours. | ||
| + | |||
| + | • RGB colours which were visible were termed as RGB pixels. | ||
| + | |||
| + | • So after the inversion of lens the camera was kept aside as it was ready for installing in microscope. | ||
| + | |||
| + | '''Light Source''' | ||
| + | |||
| + | • '''Soldering''' is introduced here. | ||
| + | |||
| + | • Connecting of any two wires, devices, electronics part is done by soldering. | ||
| + | |||
| + | • First soldering was done on a battery holder by connecting two wires. | ||
| + | |||
| + | • A led with a switch connected to it was the required light source. | ||
| + | |||
| + | • Led and battery will then be connected to the microscope which will be the light source. | ||
| + | |||
| + | '''Design or the Model for Microscope''' | ||
| + | |||
| + | • The instructors did not mention any thing about the design part. | ||
| + | |||
| + | • You have the freedom to design your own microscope using any mechanism. | ||
| + | |||
| + | • Field Trip was planned for the same. | ||
| + | |||
| + | • HBCSE campus was the field and we had to find the junk which could be made useful in building our microscope. | ||
| + | |||
| + | • The model design depends on you. | ||
Latest revision as of 11:30, 22 February 2016
I am working at HBCSE and my area of interest is Electronics, design and technology. Here,at Cube lab i got exposed to Art-Science- BLR. I designed a microscope from junk. I am interested in designing new useful stuff from junk and share ideas.
Here, I am sharing making of a microscope which I learnt in a workshop conducted by ART SCIENCE BLR lab, Bangalore.
Making Process
Camera
• Dismantle a web cam, and try to explore how the camera works.
• Lens is the main part and later it was figured out that to make this microscope we had to invert the lens.
• Testing of these lenses and its magnifying power involves two steps.
1. Invert the camera lens 2. Bring lens close to computer screen till it shows RGB colours.
• RGB colours which were visible were termed as RGB pixels.
• So after the inversion of lens the camera was kept aside as it was ready for installing in microscope.
Light Source
• Soldering is introduced here.
• Connecting of any two wires, devices, electronics part is done by soldering.
• First soldering was done on a battery holder by connecting two wires.
• A led with a switch connected to it was the required light source.
• Led and battery will then be connected to the microscope which will be the light source.
Design or the Model for Microscope
• The instructors did not mention any thing about the design part.
• You have the freedom to design your own microscope using any mechanism.
• Field Trip was planned for the same.
• HBCSE campus was the field and we had to find the junk which could be made useful in building our microscope.
• The model design depends on you.
