Difference between revisions of "Susmita"
From (art)scienceblr
| Line 9: | Line 9: | ||
About the 3D printer | About the 3D printer | ||
| + | SOFTWARE SETTINGS FOR CURA | ||
Print speed 20-40mm/s | Print speed 20-40mm/s | ||
Single extruder | Single extruder | ||
Revision as of 12:05, 13 October 2017
3D printer that we used was the FabX https://www.3ding.in/3dprinters/fabx Softwares used -Cura 2.7.0 -Cura 15.04.6 -SketchUp -Repetier-Host Mac -Slic3r
About the 3D printer
SOFTWARE SETTINGS FOR CURA
Print speed 20-40mm/s
Single extruder
Filament Diameter 1.75mm
Built platform 100mm * 100mm * 100mm
Nozzle Diameter 0.4mm
Nozzle temperature 210 degrees
bed temperature 70-50 degrees
