Difference between revisions of "Turbidity meter"

From (art)scienceblr
Jump to: navigation, search
(Created page with "Making turbidity meter with Tasneem .")
 
Line 1: Line 1:
Making turbidity meter with Tasneem .
+
With Tasneem we made a simple turbidity meter using an LDR and laser.
 +
 
 +
[[File:Turbidity 1.jpg|750px]]
 +
 
 +
Materials needed -
 +
 
 +
1. LDR
 +
2. Laser Pointer
 +
3. 33k Resistor
 +
3. Dark tube/Box (We used a black pvc pipe)
 +
4. Arduino + usb cable
 +
5. Wires
 +
6. test tubes
 +
 
 +
Tools -
 +
1. Soldering Iron + Solder
 +
2. Glue Gun
 +
3. wire cutter/stripper 
 +
 
 +
 
 +
1. Connect one leg of the LDR ground on the arduino . The other leg of the LDR will go to analog input 0 (Any of the analog inputs can be used.
 +
2. Connect one leg of the resistor to +5V on the arduino. The other leg of the resistor will go to the same analog input as the LDR (A0 in this case). This forms a [https://en.wikipedia.org/wiki/Voltage_divider| potential divider.]

Revision as of 17:14, 30 March 2016

With Tasneem we made a simple turbidity meter using an LDR and laser.

Turbidity 1.jpg

Materials needed -

1. LDR 2. Laser Pointer 3. 33k Resistor 3. Dark tube/Box (We used a black pvc pipe) 4. Arduino + usb cable 5. Wires 6. test tubes

Tools - 1. Soldering Iron + Solder 2. Glue Gun 3. wire cutter/stripper


1. Connect one leg of the LDR ground on the arduino . The other leg of the LDR will go to analog input 0 (Any of the analog inputs can be used. 2. Connect one leg of the resistor to +5V on the arduino. The other leg of the resistor will go to the same analog input as the LDR (A0 in this case). This forms a potential divider.