Difference between revisions of "Susmita"
From (art)scienceblr
| Line 5: | Line 5: | ||
- SD card | - SD card | ||
| + | |||
| + | Make sure that there is no data on the SD card because you need to format the card in order to use it with the printer. | ||
Revision as of 14:12, 13 October 2017
The 3D printer which is available in Srishti Old Campus is a FABX The printer has two sources by which you can give it the command to print the object that are the
- USB 2.0 A/B and
- SD card
Make sure that there is no data on the SD card because you need to format the card in order to use it with the printer.
Software
-Cura 2.7.0
-Cura 15.04.6
-SketchUp
-Repetier-Host Mac
-Slic3r
About the 3D printer
SOFTWARE SETTINGS FOR CURA
Print speed 20-40mm/s
Single extruder
Filament Diameter 1.75mm
Built platform 100mm * 100mm * 100mm
Nozzle Diameter 0.4mm
Nozzle temperature 210 degrees
bed temperature 70-50 degrees
