Difference between revisions of "Susmita"
From (art)scienceblr
| Line 1: | Line 1: | ||
| + | 3D printer that we used was the FabX https://www.3ding.in/3dprinters/fabx | ||
| + | Softwares used | ||
| + | -Cura 2.7.0 | ||
| + | -Cura 15.04.6 | ||
| + | -SketchUp | ||
| + | -Repetier-Host Mac | ||
| + | -Slic3r | ||
| − | + | ||
| + | About the 3D printer | ||
| + | Print speed 20-40mm/s | ||
| + | Single extruder | ||
| + | Filament Diameter 1.75mm | ||
| + | Built platform 100mm * 100mm * 100mm | ||
| + | Nozzle Diameter 0.4mm | ||
| + | Nozzle temperature 210 degrees | ||
| + | bed temperature 70-50 degrees | ||
Revision as of 10:30, 13 October 2017
3D printer that we used was the FabX https://www.3ding.in/3dprinters/fabx Softwares used -Cura 2.7.0 -Cura 15.04.6 -SketchUp -Repetier-Host Mac -Slic3r
About the 3D printer
Print speed 20-40mm/s
Single extruder
Filament Diameter 1.75mm
Built platform 100mm * 100mm * 100mm
Nozzle Diameter 0.4mm
Nozzle temperature 210 degrees
bed temperature 70-50 degrees
