Saurabh

From (art)scienceblr
Revision as of 17:54, 17 October 2015 by Saurabh (Talk | contribs)

Jump to: navigation, search

My name is Saurabh Bedarkar, studying in 2nd year at Srishti Institute of Art, Design and Technology. Currently I am in Sensors, Detectors and Probes course. I have taken this course so that I could Experiment around with the interaction between humans or say nature with technology.

Micro Robot

WP 20150914 18 00 13 Pro.jpg
This was my first robot and was really exciting to build one. It was fascinating that how we can convert a vibrating motion into kinetic motion with just a motor, switch and a battery. And also I learned soldering circuits. Click here to check the video.







Trip to SP Road

Vishal.png
Trip to SP road was really a explorative trip for me were I got to know many new things or components which are available around us. The street had all the required electrical components through which one can make his own computer or a mobile. I was fascinated by seeing all the big motors, heavy machinery, and also the types of different electrical components which exists. Specially I got to know many types of sensors available in the market like the ultrasonic sensor, motion sensor, color sensor, etc.
Capa.png










Introduction to Components

Battery

Making your own Battery

90v.jpg
We had to make our own switch. While thinking about the switch we all thought of our body as a switch as it conducts electricity. We started with a 9v battery but the LED didn't lit up. So we staked 9 batteries in series making a 81v battery which worked really well. It was a breath taking experiment as we were passing 81v through our body. We also tried the same experiment with plants and leaves.
Thermister switch.jpg
Leaves 90v.jpg

We also had to make our own battery using lemons, household lemons. It was interesting to see how we can use a simple lemon as a battery.

J0AMcRgD.jpg


































Resistors

Fixed Resistors

IMG 8144.jpg
In this experiment I experimented with limiting current through resistor. We controlled the LED brightness by placing the resistors in series combination and parallel combination.
IMG 8146.jpg
IMG 8147.jpg
IMG 8154.jpg


















Variable Resistors

Potentiometer

Potentiometer is really helpful device as it control the amount of current flowing. At first we had to put resistors in series to control the flow but then this is really helpful. It was fun working with potentiometer as we controlled the LED brightness. Click here to see the video.
WP 20150921 12 50 43 Pro.jpg












Thermistor

IMG 8149.jpg
Thermistor is a temperature sensitive resistor which changes resistance with change in temperature. We made a simple circuit which lights up the LED when the temperature is high.Click here for the video.











LDR

Ldr.png
Light Depending Resistor is resistor which changes its resistance with light. It was fun playing with the light and shadow to control the brightness of the LED.Click here for the video.












Capacitors, Diodes, Transistors

WP 20150921 15 04 48 Pro.jpg
WP 20150922 13 29 44 Pro.jpg





















555 oscillator

WP 20150924 13 36 49 Pro.jpg
555 is a Integrated Circuit which is a timer IC. We used it to create sound pulse through a speaker. It also changed the sound as the resistance changed.Click here to check out the video.












Make a Toy

IMG 8160.jpg
I took inspiration from an game character i.e an android robot from Portal. The major components I used are Motion sensor, 555IC, and a red LED. At first I tried many circuits but most of them failed but finally the circuit worked. I used a Arduino which powers the motion sensor, and when the motion is detected the 555IC circuit powers on with a red flashing LED making the sound of gunshots. It was a difficult job to make this circuit as we had to solder the circuit on a PCB.Click here to get fired.
Untitled.png
WP 20151001 00 52 45 Pro.jpg

























Amplifier

IMG 8139.JPG
This was the first time that I made a speaker. It was interesting to make the amplifier. Also to cover the speaker I made a MDF box as it is considered a good material for speaker box. In the circuit we used a LM386 Amplifier IC. And also we have done a bass boost circuit. It was a tedious task as the circuit was not working after soldering. But after many tries, failure and frustration finally the circuit worked. Click here to check out the video.
IMG 8172.jpg
IMG 8173.JPG
































Arduino

Blink

Ard.png
This was the first time we were going to learn Arduino though I knew a little bit of it, I was excited to learn it. The first task was make a LED blink. After making the circuit I realized that Arduino was like a remote control, we just need to tell it what we want it to do in its coding language and with perfect connects we could make awesome things.










Knight Rider

IMG-20151005-WA0001.jpg
After the first task of LED blinking we had to achieve a effect of LED glowing in series as shown in a movie Knight Rider. It was fun working with it and trying mess around with it using different sensors to control the effect.















Magical Object

IMG-20151005-WA0002.jpg
The task was to create a magical object using Arduino power. I teamed up with Sumit as it was a group activity. We made a magic hand which grabs you when you go near it.Click here to get your hand grabbed.
Hand.png












DIY Pollution Sensor

Disa.PNG
This was a group work and I was working with Shivon,Prarthana,Rajat,Payal,Shravan and Anuska. We had to make a system which detects the air pollution levels and shows the data in a simpler way to the people. I, Shivon and Payal made the whole circuit which consisted of a MQ-7(carbon monoxide)sensor, DHT-11(temperature and humidity)sensor and a SD card shield. I wrote the code using the example of Datalogger example and adding the sensors library so that the data is shown in proper values. At first the circuit was failing but after many attempts and code changes, it worked fine.
20151017052108.jpg
Data.PNG