Difference between revisions of "Payal Tanksale"

From (art)scienceblr
Jump to: navigation, search
Line 69: Line 69:
  
 
=Air Quality Sensor=
 
=Air Quality Sensor=
In this particular task, I had to develop an air quality sensor. It was a good learning experience as I learnt a little more about Arduino coding. Initially the coding was going wrong as I had not entered the correct analogue pin number. I was able to understand the connections and the pins of the sensor.
+
 
 +
Develop a Air quality sensor.
  
 
==Circuit==
 
==Circuit==
Line 82: Line 83:
  
 
[[File:Screenshot (82).png|500px]]
 
[[File:Screenshot (82).png|500px]]
[[File:
+
 
 +
==Reflection==
 +
 
 +
It was a good learning experience as I learnt a little more about Arduino coding. Initially the coding was going wrong as I had not entered the correct analogue pin number. I was able to understand the connections and the pins of the sensor.
 +
 
 
=Turbidity Sensor=
 
=Turbidity Sensor=
  
We developed our own turbidity sensor. Building your own sensor felt like some achievement. Initially I was kind of worried how we build our own sensor. After understanding the connections it seemed easy as it was based on a LDR which we had studied before. After the connections we tested it and it worked fine. Later we placed it in the box it started misbehaving. I wasn’t able to understand
+
Developed your own turbidity sensor.  
what went wrong. Later after some time I realized I had done the connection wrong while reconnecting while placing in the box. We tested it with samples and it worked fine. A slightest change of pin made a huge difference to the working. It was interesting to learn making of such sensors as the huge machines are built on the base of such a small connection.
+
  
 
[[File:IMG 20170310 102825.jpg|200px]] [[File:IMG 20170310 101830.jpg|200px]] [[File:IMG 20170310 101851.jpg|200px]]
 
[[File:IMG 20170310 102825.jpg|200px]] [[File:IMG 20170310 101830.jpg|200px]] [[File:IMG 20170310 101851.jpg|200px]]
Line 106: Line 110:
  
 
[[File:ChartGo (grid).png|400px]]
 
[[File:ChartGo (grid).png|400px]]
 +
 +
==Reflection==
 +
 +
Building your own sensor felt like some achievement. Initially I was kind of worried how we build our own sensor. After understanding the connections it seemed easy as it was based on a LDR which we had studied before. After the connections we tested it and it worked fine. Later we placed it in the box it started misbehaving. I wasn’t able to understand
 +
what went wrong. Later after some time I realized I had done the connection wrong while reconnecting while placing in the box. We tested it with samples and it worked fine. A slightest change of pin made a huge difference to the working. It was interesting to learn making of such sensors as the huge machines are built on the base of such a small connection.
  
 
=Futuristic thinking=
 
=Futuristic thinking=

Revision as of 15:07, 26 March 2017

Introduction

About me

Hello, my name is Payal. I am studying Industrial Arts and Design practices at Srishti Institute of Art, Design and Technology. I have developed interest in electronics since the last sensors class. I have made tiny circuits for different projects in my products and I feel I can reflect some of my electronic learning in further projects as well. Learning Arduino coding was kind of difficult for me initially hence, this class I am looking forward to get hand of the Arduino and explore more sensors.

Touch me not monster

Reflection

In this particular task, we made a creature which works of Arduino Uno, servo motors and IR sensor. While making we face slight problems in the coding and connections of the IR sensor. The coding was going wrong which was difficult to figure out. The serial number reading wasn’t changing from zero. Also the coding at the point when we had to synchronize the two motors and add in values accordingly. Overall it was a good revision to the previous sessions as I realized while doing that there were many things I had forgotten about. Though a quick throwback, I kind of can now relate to the equipment and figure out a little coding as well.

New 4.JPG

Resistors in Series and Parallel

Resistors in Series

Consider two resistors R1 and R2 Voltage V Current I

The current flowing I will be opposed by two resistances. The equivalent resistance will be the sum of the individual resistance. If current flows through R1 and R2 the voltage will drop at those two points. By Ohm’s Law, V1= IR1, V2=IR2

Total Voltage V= V1+V2

V=IR1+IR2

V=I(R1+R2)

V/I=R1+R2

But=IR

IR/I=R1+R2

R=R1+R2

Resistors in Parallel

Consider resistance R1 and R2. Voltage V Current I Here the current gets divided by the two resistance connected in parallel. Therefore total current (I) = I1+I2 By Ohm’s Law,

V=IR

Therefore, I=V/R

Substituting in the equation,

I= V/R1+V/R2

I=V(1/R1+1/R2)

V/R=V(1/R1+1/R2)

1/R=1/R1+1/R2

Reflection

The first half of the class was a basic introduction to the necessary terms. It was again a revision oh what we learnt in our physics class. It now can relate to the fact how these equations play a vital role in building the circuits. I remember how once we had shot the LED while we were working with the revision project as we forgot to apply a certain Ohm resistor to the circuit. I am looking forward in learning the conversions as I feel I am kind of lacking I the basics.

The second half was really fun. It was good experience to visit the place and collect samples. We collected around 8 samples from different areas. Some with clear water some with algae and some with moss and rainwater puddles. We also have taken soil samples. The place had a peculiar smell in the beginning like too many harmful gases were mixed together. Also, the place was dumped with a lot of waste. In spite of this there were a lot of birds wandering around the lake which gives a clue of there being fishes or some food they rely on. We found some water creatures as well which can gives us an idea about the clarity of the water. Looking forward to understand the organisms and what role they play and how can we relate sensors to these creatures.

WhatsApp Image 2017-03-14 at 12.10.07 PM.jpeg WhatsApp Image 2017-03-14 at 12.10.01 PM.jpeg WhatsApp Image 2017-03-14 at 12.10.06 PM.jpeg

Air Quality Sensor

Develop a Air quality sensor.

Circuit

Mq135pins.jpg

Connections

WhatsApp Image 2017-03-14 at 4.36.13 PM.jpeg

Coding

Screenshot (82).png

Reflection

It was a good learning experience as I learnt a little more about Arduino coding. Initially the coding was going wrong as I had not entered the correct analogue pin number. I was able to understand the connections and the pins of the sensor.

Turbidity Sensor

Developed your own turbidity sensor.

IMG 20170310 102825.jpg IMG 20170310 101830.jpg IMG 20170310 101851.jpg IMG 20170310 105520.jpg IMG 20170310 133237.jpg

Circuit

LDR circuit.png

Connections

IMG 20170310 101908.jpg LDR1-1-620x436.png

Coding

Screenshot (109).png

Graph

ChartGo (grid).png

Reflection

Building your own sensor felt like some achievement. Initially I was kind of worried how we build our own sensor. After understanding the connections it seemed easy as it was based on a LDR which we had studied before. After the connections we tested it and it worked fine. Later we placed it in the box it started misbehaving. I wasn’t able to understand what went wrong. Later after some time I realized I had done the connection wrong while reconnecting while placing in the box. We tested it with samples and it worked fine. A slightest change of pin made a huge difference to the working. It was interesting to learn making of such sensors as the huge machines are built on the base of such a small connection.

Futuristic thinking

Draw Cyborg, Post Human

For Cyborg I drew a human which has a robotic head and a normal human body. The body functions like a human but the thinking and the working of the brain is robot. Basically can be controlled. For post human, initially I drew a weirdly looking creature but later I drew soil particles which shows the disappearance of the human race.

WhatsApp Image 2017-03-14 at 12.09.59 PM.jpeg

Futuristic Gadget

For this particular task, I was paired with Aman. We made a head gear which had an antenna which could read everyone's mind. Also, the headgear had a mic which can be used to talk of things which a person wants the other people to obey or listen.

WhatsApp Image 2017-03-14 at 9.59.32 PM.jpeg

Line Graph with D3

In this we had construct a line graph using html. It was huge task getting the output. I haven't done any language coding in school. I am absolutely unaware of the basic and thats why I found it difficult to understand. I began with reading come codes online so as to know how its done but then it seemed to be very confusing. After a point I tried entering data and saw how the code changes and figured out a part of it. Getting the x axis was something I was suck on but then got the doubt cleared. I can conclude saying I would have learnt a percent of it. It would have been easier, if I knew some basic terms and would have been a faster learning.

Screenshot (132).png Screenshot (134).png

Arduino with Processing

In this task we had to give output of the Arduino data in graphical form which shows the change in values by wave graph.This seemed easy to understand. How to link one programme to the other and use processing to give out the output data.

Screenshot (145).png Screenshot (142).png Screenshot (143).png

Blink the LED Tasks

Blink the LED 5 times only

Screenshot (159).png

Let the Serial monitor ask number of times

Screenshot (168).png Screenshot (166).png

LDR value decides the blinking

Screenshot (173).png Screenshot (171).png

Reflection

Today, I really could understand coding correctly. It was really easy to understand as we tried to code from first writing in simple english and then converting it into code language.Similarly, for the circuits, using logic for the connections. Why input and output values are used etc. I feel I have much better understanding with this particular writing and rewriting the code now.