Aayush

From (art)scienceblr
Revision as of 18:16, 17 October 2015 by Aayush (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Micro robot

IMG 20151017 114043.jpg
The first task at our hand was to make a simple micro robot,with components such as a vibrating motor, a 3V battery and a switch. I also learnt how to solder with a soldering iron, this task given to us was very different and made us scratch our brains, which were idle for a long time. Overall this first exercise was astonishing for me.

click here for video










Trip to SP road

Capa.png
My Trip to SP road was an exploratory trip for me, SP road is a techie's dream come true it is the hub of electronic components in Bengaluru. The street had all the required electrical components through which one can make his own computer. I was fascinated by all sorts motors, heavy machinery, heavy tools and also the types of different electrical components which exists.I got a chance of finding out different types of sensors available in the market like the ultrasonic sensor, motion sensor, etc.
Vishal enterprises.jpg

















Introduction to Components

Battery

Making your Own battery

HW Battery.JPG
This particular task involved us to make our own switch. We used our bodies as a conducting medium, We used a series of 9v batteries to pass current through our bodies and make the LED glow. We also used lemon batteries, a common household item-lemon, that is capable of conducting electricity through it.
IyRc aXK.jpg












Resistors

Fixed Resistors

IMG 20150921 125220.jpg
This was our Introduction to the breadboard, and the much notorious series and parallel connections. The most important thing was to get the rough idea of the internal connections.
Parallel.jpg































Variable Resistors

potentiometer

Potentiometer.png

In this exercise we experimented with a potentiometer , which controls the amount of voltage being passed which in turn affects the brightness of the LED. The Materials required were a 10KB potentiometer, an LED and a Bread Board.This task was exciting and more than that it was a very good learning experience.













Thermistor,LDR

Thermistor.jpg

A thermistor is a type of resistor whose resistance is dependent on temperature, more so than in standard resistors. The word is a combination of thermal and resistor. This worked on a principle; When a match stick is brought close to it, the temperature change causes it to glow the LED. click here for video

The Next thing worked on was the LDR, A photoresistor or light-dependent resistor (LDR) or photocell is a light-controlled variable resistor. The resistance of a photoresistor decreases with increasing incident light intensity; in other words, it exhibits photo-conductivity.

Ldr.jpg

click here for video










Capacitors, Diodes and Transistors

IMG 20150921 143055.jpg

A capacitoror a condenser is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field. Our task was to play with it and the get the idea of it's usage. click here for video

A transistor is a semiconductor device used to amplify and switch electronic signals and electrical power. It is composed of semiconductor material with at least three terminals for connection to an external circuit.We did the same exercise as mentioned above but with the addition of a transistor.

IMG 20150922 132950.jpg













555 Oscillator

IMG 20150924 132818.jpg

Here we made a speaker which could produce sound when connected through a battery, this was an intriguing task as the circuits were very very minute and needed to be precise, it was a little hard but fun after all the hard work.click here










The Toy

IMG 20151017 163134.jpg
We were asked to make a toy, we could use whatever components we desired at but end of the day we had to complete a workable toy. I chose to make a simple car, which consisted of a switch, a 9v battery, a DC motor and some ice-cream sticks.I used a combination of m-seal and fevi-quick to make the structure durable as well as a little lighter so that the Dc motor could pull the wheels with the help of a pulley and a rubber band.Overall it was a difficult task but none the less achievable.

click here for video








Amplifier

IMG 20151017 170405.jpg
IMG 20151017 170122.jpg
This was a daunting task,but at end of the day we were successful enough to make an amplifier.This was the first time that I soldered so many minute components at once, yes it was a little frustrating but that's where the fun lies. Thee burns from the Solder iron have made us masters in soldering and with the speaker working fine when plugged through an 3.5 mm jack to mobile makes it even more delightful.The Ic that I used was the lm386.






















Arduino

Basics

IMG 20150929 124645.jpg

We were taught the basics of Arduino uno, I particularly was not at all interested at first but as time went by my interest in this area grew, we were asked to perform basic tasks like blinking an LED, Knight Rider LED and the usage of a servo motor. click here for video click here for video










Magic Box

IMG 20151017 172523.jpg
this was group project, I teamed up with Dhruv Jesrani. It was very difficult to get an idea firstly, as we brainstormed and then after what seemed like a million hours, Dhruv up with the idea of making a box that would make something disappear. It was to make a box with three layers. In the lowest layer, there would be the Arduino and the soldered PCB circuit. The layer above that would just be covered in cloth and on the top-most layer, there would be the object we would want to make disappear. The other components included a LDR and 360 degree servo motor. So when I place a black cloth on top, I would bring my hand closer to the LDR, thus triggering the servo motor attached to the platform to spin and rotate the platform with it, thus making the ball fall on top of the cloth in the lower layer. And as the motor would do a complete 360 degree spin, we would move our hand away, thus making the object disappear. It would’ve turned out to be a neat trick, had the motor not failed. at the end during the time of attachment the motor to the platform, glue went inside it, thus jamming the rotation.

click here for video