Turbidity meter

This is a simple Turbidity meter with a Light Dependent Resistor and a Laser

Materials needed -

1. LDR 2. Laser Pointer 3. 33k Resistor 3. Dark tube/Box (We used a black pvc pipe) 4. Arduino + usb cable 5. Wires 6. test tubes

Tools - 1. Soldering Iron + Solder 2. Glue Gun 3. wire cutter/stripper

1. Connect one leg of the LDR ground on the arduino . The other leg of the LDR will go to analog input 0 (Any of the analog inputs can be used. 2. Connect one leg of the resistor to +5V on the arduino. The other leg of the resistor will go to the same analog input as the LDR (A0 in this case). This forms a potential divider.