Difference between revisions of "Circular chromatography"

Revision as of 12:45, 3 April 2017

Introduction

  CHROMATO = colour; of or in colours

  GRAPHY = writing...representing...or a process, or art / science working with such a process

Chromatography is a way to analyse what is in a mixture (in this case liquid) - by separation on solid support (in this case the fibers in the paper), and visualization in this case, by a photographic process.

  "The mixture flows though a medium and the individual substances that make up the mixture are deposited at different distances from the point of inflow." - from website of Bio-dynamic Society of India

The separation happens as the liquid slowly wets the paper by capillary action -
Those compounds that stick to the paper (stationary / solid phase), will stay closer to the point of inflow.
Those compounds that prefer the liquid (mobile phase), it will travel further with the liquid.
This process can just be called paper chromatography. Because we use paper as a support.Because we did this on a circular piece of paper, it is called circular chromatography.

In this case, we took some soil and mud samples we had collected in different water bodies locations, and tried to analyse the humic content of the samples.
This method can be applied to any other liquid mixtures.

To learn more, here is the Khan Academy's explanation of the Principles of Chromatography.

Methods

This is based on our experience trying out the recommended protocol from the page of BIO-DYNAMIC ASSOCIATION OF INDIA
The original steps from Biodynamic Association of India:

  1. A circular filter paper (Whatman #1) with a cylindrical paper wick sitting in a 0.5% solution of silver nitrate is allowed to absorb the solution, which spreads by capillary action, to a certain diameter. 
  2. The wick is removed and the paper is dried.
  3. Meanwhile, the substance to be tested is mixed with a 0.1 to 1% solution of sodium hydroxide and let stand for a period of time. 
  4. The prepared filter paper is then allowed to absorb this solution and the substance spreads over the paper. 
  5. When it has spread to a certain distance, the wick is removed and the paper dried. The paper is then exposed to indirect sunlight to let the image develop. 

Materials

Chemicals

• 0.5% solution of silver nitrate (you can find in photography suppliers)
• 0.1 to 1% solution of sodium hydroxide (NaOH, otherwise known as lye or caustic soda - be careful, because it can burn)

Other materials

• paper (Whatman, or any acid-free thick paper)
• reservoir
• wick (medical cotton, and rolled it into a wick)
• light for development - sunlight is fine unless controlled exposure is wanted

Step by Step

DAY1

Extraction

This is the step where we take our samples we want to analyse, and extract what is in it into a liquid phase.

Just like taking a crushed piece of garlic, and putting it into water or oil, brings out different flavors in the water and oil, we decided to see what will be extracted from the soil samples when using 2 different solutions.

• 0.2% NaOH in water
• isopropyl alcohol

To learn more, here is a Khan Academy video on extractions.

1. Take one spoon scoop of soil/mud into petridish to mix and extract with NaOH.
   
2. The same scoop of soil/mud into a tube to extract with isoproypl alcohol (it evaporates faster). Here, it may be best to put both in a closeable container, so we can mix and shake the samples.
   
3. Leave the samples overnight at room temperature.
   

For better controlled experiments -

• Weigh out equal amounts of soil
• Shake constantly
• Constant temperature during extraction
• Consistent amount of time during extraction

DAY2
The next steps needs to happen in a darkroom with a red lamp.

• 

  Preparation of light sensitive paper

• 

  Sample application

• 

  Exposure to light

Preparation of Light sensitive paper

1. Make the 0.5% silver nitrate solution
2. Place 2mL of the 0.5% silver nitrate solution in a clean container
3. Place a short wick through the middle of the filter paper
4. Place the wick in the silver nitrate
5. Wait til the silver nitrate circle is about 1cm from the edge
6. Remove the wick
7. Let the filter paper dry.

Sample application

1. Add a new wick on the prepared paper above
2. Take 2mL the liquid part of the samples prepared above, and place in a cleaned container
3. Let the sample travel til just before the silver nitrate circle
4. Remove wick
5. Let the filter dry

Exposure to see the different bands

1. Take the filters and expose to indirect light, or in more controlled situations, use a timer and a light set up
2. et voila! time for analysis

Which method to use

• Bio Crystallisation, copper chloride crystallisation, proteins
• Capillary Dynamolysis, vertical filters, ‘rising pictures’, sugars/ bitter materials
• Bio Chromatography, horizontal circular images, minerals, sugars/ bitter materials

1. Description of methods
2. Choosing appropriate methods

Resources/Links

1. Chromatograpy of wine
2. Capillary Dynamolysis
3. Scandenavian Biodynamics Research
4. Academic paper on Capillary Dynamolysis Image Discrimination Using Neural Networks
5. Summary of Kolisko's book
6. History of Science Group of the Anthroposophical Society in Great Britain
7. Khan Academy Principles of Chromatography
8. Extraction of Soil Organic Matter
9. Types of Paper Chromatography